Raspberry PiでXBMCを動かす

Facebook にシェア
LinkedIn にシェア
[`evernote` not found]

Raspberry Piを手に入れて、まあ、普通にSDカードを作って、立ち上がってそのままにしてたんだけど、冬休みになって、色々さわってみました。その中で、やはり凄いと感じたのは「XBMC」です。これが、数千円で動くのですから驚きです!

Raspberry PiのXBMCの事をRASPBMCと言います。 http://www.raspbmc.com/


MacBook-Pro-2:~ Raspberry-PI himamura$ curl -O http://svn.stmlabs.com/svn/raspbmc/testing/installers/python/install.py

  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100 13913  100 13913    0     0  10426      0  0:00:01  0:00:01 –:–:– 22622

MacBook-Pro-2:Raspberry-PI himamura$ chmod +x install.py 

MacBook-Pro-2:Raspberry-PI himamura$ sudo python install.py

Raspbmc installer for Linux and Mac OS X
Please ensure you’ve inserted your SD card, and press Enter to continue.

Enter the ‘IDENTIFIER’ of the device you would like imaged, from the following list:
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   1:                        EFI                         209.7 MB   disk0s1
   2:                  Apple_HFS Macintosh HD            749.3 GB   disk0s2
   3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   1:             Windows_FAT_32                         58.7 MB    disk1s1
   2:                      Linux                         3.9 GB     disk1s2

Enter your choice here (e.g. ‘disk1s1’): disk1s1

It is your own responsibility to ensure there is no data loss! Please backup your system before imaging
You should also ensure you agree with the Raspbmc License Agreeement

Are you sure you want to install Raspbmc to ‘/dev/disk1s1’ and accept the license agreement? [y/N] y
Downloading, please be patient…
Downloaded 15.79 of 15.79 MiB (100.00%)

Unmounting the drive in preparation for writing…
Unmount of all volumes on disk1 was successful
Please wait while Raspbmc is installed to your SD card…
(This may take some time and no progress will be reported until it has finished.)
0+1174 records in
0+1174 records out
76800000 bytes transferred in 14.820558 secs (5181991 bytes/sec)
Installation complete.
Unmounting the drive in preparation for writing…
Unmount of all volumes on disk1 was successful
Mounting the drive for post-installation settings
Volume (null) on /dev/rdisk1s1 mounted

Would you like to install Raspbmc to a USB stick – note this still requires an SD card to boot from [y/N] N
Would you like to configure networking manually? This is useful if you are configuring WiFi or a non-DHCP network [y/N] N
Unmounting the drive in preparation for writing…
Unmount of all volumes on disk1 was successful

Raspbmc is now ready to finish setup on your Pi, please insert the SD card with an active internet connection

MacBook-Pro-2:Raspberry-PI himamura$ 
プロンプトが出たらSDカードを抜き、Raspberry Piに差し込みブードさせます。

Raspberry Piでブートが始まると、XBMC本体のダウンロードが始まります。




Facebook にシェア
LinkedIn にシェア
[`evernote` not found]


メールアドレスが公開されることはありません。 * が付いている欄は必須項目です

このサイトはスパムを低減するために Akismet を使っています。コメントデータの処理方法の詳細はこちらをご覧ください