Atmelが、SAMA5D3と言うARM Cortex-A5を使用したeMPUをリリース。
確かに、Atmelあたりが、このへんを狙ってくると、ArduinoでLinuxが動く高性能版もリリースされる可能性もあるのかな?
確かに、Atmelあたりが、このへんを狙ってくると、ArduinoでLinuxが動く高性能版もリリースされる可能性もあるのかな?
基本スペックは
- ARM Cortex-A5 core up to 536MHz (850DMIPS).
- Floating point unit (FPU) with up to 3 times the performance of Cortex A8 FPU.
- 166MHz bus speed delivering up to 1328MB/s bandwidth.
- Power consumption:
- 0.5mW in low-power mode with SRAM, registers retention and
- ~1.2µA in backup mode with RTC running
- Connectivity:
- Dual Ethernet and dual CAN ports (Only one model has both)
- Gigabit Ethernet MAC with IEEE1588 and 10/100 MAC
- Two CAN controllers
- 3x HS USB ports that can be configured as three host or two host and one device port
- 3x SDIO/SD/MMC ports, up to 7x UARTs, 2x SPIs, 3x TWIs, soft modem, CMOS sensor interface, 12-bit ADC, 32-bit timers, etc…
- Display and Camera Support:
- Graphic LCD controller (For most models)
- Resistive touchscreen interface
- CMOS sensor interface
- 2x Synchronous Serial Controller (SSC) interfaces
0>200mw>
EthernetとCANの組み合わせでデバイスが決まる感じです。
詳しい資料はこちら
http://www.atmel.com/Microsite/sama5d3/default.aspx
評価ボードはてんこ盛りな感じで、かなり高価です $595
評価ボードの購入はこちら
http://store.atmel.com/SearchResult.aspx?q=gsd:c-100113_k-sama5d3