暇村工房

Raspberry Pi用のArduinoアダプター

Raspberry Pi用のArduinoアダプター

103990079仕様:
1.Arduino connector : for connecting Arduino shields
1.2.ICSP interface : Arduino ICSP
2.XBee connector : for connecting XBee communication modules
3.Sensor interface : for connecting sensors
4.Raspberry Pi connector : for connecting Raspberry Pi
5.USB TO UART
6.TLC1543 : AD converter
7.PCF8563 : RTC
8.CP2102
9.32.768KHz crystal : for RTC
10.Power indicator
11.XBee state LED
12.XBee and Arduino interface RESET button
13.XBee EASYLINK button
14.RTC battery holder : for CR1220 button battery
15.TLC1543 reference voltage configuration jumper
16.RTC jumper
17.UART jumper
when connecting P_RX and CP_TX, P_TX and CP_RX respectively, USB TO UART is connected to Raspberry Pi serial port
when connecting XB_RX and CP_TX, XB_TX and CP_RX respectively, USB TO UART is connected to XBee serial port
when connecting XB_RX and P_TX, XB_TX and P_RX respectively, Raspberry Pi serial port is connected to XBee serial port
18.Arduino AD selection jumper
short 2 and 3 : Arduino A0-A5 as AD input
short 1 and 2 : Arduino A0-A5 as digital control
19.Arduino I2C selection jumper
short the jumper : Arduino A4-A5 as I2C control (the A4-A5 of Arduino AD selection jumper should be opened)
20.Arduino SPI selection jumper
short 1 and 2 : Arduino D11-D13 as SPI control (default)
short 2 and 3 : Arduino D11-D13 as digital control
103990079 1

詳しくはこちらから!

コメントする

メールアドレスが公開されることはありません。 が付いている欄は必須項目です